2
© 2013 Directed. All rights reserved.
Menu Bar at a Glance
Menu Bar Tab
Description
Home
This screen is the default screen for direct access to all your remote commands. Select any
command on the Home screen to perform it.
Cars
This screen allows you to access and personalize your vehicle settings.
Status
Requires compatible Viper SmartStart GSM hardware with service plan. Refer to user guide
for that hardware.
GPS
Requires compatible Viper SmartStart GSM/GPS hardware with service plan. Refer to user
guide for that hardware.
More
Access settings and other advanced app features. Go to More/Settings to log in to Viper
SmartStart, and use in-app Help function to explore additional feature details.
“Made for iPhone” means that an electronic accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of
this accessory with iPhone may affect wireless performance.
Note:
The amount of time it takes for your vehicle to respond to a command can be affected
by range and proximity to vehicle. Please visit www.Viper.com/SmartStart for the latest
updates and more information.
System
Commands
Menu Bar
Basic Commands at a Glance
Commands
Description
Select this icon to lock the vehicle. When a confirmation message is
received, select it to clear.
Select this icon to unlock the vehicle. When a confirmation message is
received, select it to clear.
Select this icon (if applicable) to remote start* your vehicle. When a
confirmation message is received, select it to clear
.
The vehicle remote
starts and stays running for the programmed run time*. Select this icon
again to turn off the engine during the run time.
Select this icon to open trunk. A dialog box opens, asking you to
confirm you want to open the trunk. Select "Yes" to confirm, or "No"
to cancel the request.
Select this icon to activate panic mode for 30 seconds. Select again
during this time to turn off.
* See your Remote Start system user's guide or installer for important information about starting a manual transmis-
sion vehicle and how long the engine will run when remote started.
5. When you have finished setting up your app to con-
nect with your VSM50BTP1 system, you can send
commands from the main UI page. The app automati-
cally detects whether you are connected to VSM50B-
TP1 systems and routes your commands over the high
speed Bluetooth connection any time it is available.
6. Advanced operating features: please visit
www.
Viper.com/smartstart/smartstartbt
to read or down-
load the complete user guide.
PKE Feature
: When Passive Locking is enabled, your SmartStart Bluetooth system automatically unlocks your vehicle when you approach it while carrying your
linked iPhone. It then automatically locks the vehicle when you walk away. Sending a manual lock or unlock command temporarily disables passive locking. You
can also disable it by turning off Bluetooth on your iPhone, or by using the Disable Passive Locking button on the Cars/My Vehicles page of your app.
To set the threshold (range) where Lock and Unlock should occur, stand at the desired distance from the car for each function and press the Set Lock or Set Unlock
Threshold buttons respectively. Unlock must be set to a closer distance from the car than Lock, and for most reliable operation you should set the Lock threshold to
at least 10-15 feet greater distance than the Unlock threshold.
