- 11 -
Fig 6.10 Tape measure rectangle schematic
Note:
1) Rendering of tape measure arrangement shown in the figure below:
2) Datum mark is left front and right rear, tape measure needs to be arranged as the following figure.
6.2.3 Spreading
It’s time to spread after finishing arranging laser. Here introduce how to spread:
Front: the long edge of cloth aligns with AB and the lower left quarter of cloth coincides with point A
Back: the long edge of cloth aligns with CD and top right corner of cloth coincides with point D;
Left: the long edge of cloth aligns with AC and the lower right quarter of cloth coincides with point E;
Right: the long edge of cloth aligns with BD and top left corner of cloth coincides with point D;
E is a point on AC, and the distance from E to A is 1.5m, that is AE=1.5; F is a point on BD, and the
distance from F to B is 1.5m, BF=1.5m. Spreading rendering can be found in figure 6.11 below:
User Manual - AVM100 l v1.2 l 2014.03
ViPRO by Mobile Cloud Corporation
