- 4 -
4. Display Interface
AVM video output can be connected to independent LCD, and displayed through original installed
Car DVD as well.
AVM view illustrations: when the system starts, images can be shown in figure 4.1. The panorama
view mode is made of overhead display and single-camera display area. The former picture shows the
front, back, left and right side of the vehicle body, scopes of which is around 2
、
4
、
2.5
、
2.5 meters.
Fig 4.1 Panorama effects
Within single-camera display area, the up-right sign indicates which camera was used to show the
image as shown in figure 4.2.
Fig 4.2 Front rear sign
Note: Display of the frame is subject to the actual product; our company retains the right to
interpret it.
The displayed effects may be influenced by the following situations:
1) Camera is exposure to the sun directly
2) Rainstorm or rainy days
3) Camera interface freezes or spots with clay
、
dust
、
or snowflakes
4) Under a weak light of the environment
5 System function
5.1 General Function
1. When the car starts, the system will stay in the standby mode and it will open automatically if you
put the car in reverse gear or press power button of remote control.
2. After turning on the system, if the car is not stay in reverse gear or users don’t operate or press
power button of remote control. within 30 seconds, the system will enter the standby mode.
3.
When the car put in reverse mode the single camera image display area will exchange to rear
view images, otherwise, it will exchange to the front view image automatically.
4
、
Press OPTIONS key of remote control., the single camera image display area will show either
front-back or all-around images
User Manual - AVM100 l v1.2 l 2014.03
ViPRO by Mobile Cloud Corporation
