background image

Safety

10

EN

i) Do not use the camera in areas with live parts. 

You may get 

an electric shock.

 Before starting the work, make sure that all

the circuits in the work area are switched off and secured

against accidental switching on.

j) Do not use the camera in areas where it may come into

contact with moving parts. 

If the flexible shaft gets caught in 

moving parts, it may result in damage or injury.

 Before starting

the work, make sure that all the machines in the work area

are switched off and secured against accidental starting.

k) Do not use the camera in potentially explosive areas (e.g.

fuel or gas tanks), 

 as the static discharge can lead to an 

explosion.

l) Keep children away from the camera and the attachments.

Safety warnings for batteries

CAUTION!

Batteries may contain flammable substances. If batteries are not 

handled properly, they may leak, become hot, catch fire or explode 

under certain circumstances. This may cause serious injuries.

a) Do not expose the batteries and the camera to extreme

conditions, like radiators or direct sunlight.

b) Never attempt to charge non-rechargeable batteries.

c) Batteries should not be reactivated using other means,

taken apart, thrown into a fire or shorted.

d) Keep the batteries out of reach of children. If children

or pets swallow the battery, seek medical attention

immediately.

e) Avoid battery fluid from coming into contact with the skin,

eyes and mucous membranes. If they come into contact

with battery fluid, rinse the affected area with clean water

and seek medical attention immediately.

Summary of Contents for Micro Visioval 294200





































Reviews: