Usage - General applications
17
EN
Switching the laser pointer ON / OFF
Selecting the mode
Switching on:
• Turn on the inspection camera
(see chapter "Switching the
inspection camera on / off").
• Keep the "LED work light / laser
pointer" function switch
3
pressed for at least two seconds to
switch on the laser pointer
26
.
• Turn on the inspection camera
(see chapter "Switching the
inspection camera on / off").
• Depending on the required
application, press the following
selection switch "Distance
measurement"
23
, "Camera
recording"
22
or "Temperature
measurement"
20
.
The laser pointer can be switched on and off in any mode (except
during playback and / or when deleting images).
3
26
23
22
20
Switching off:
• Press and hold the "LED work light / laser pointer" function switch for
another two seconds to switch the laser pointer off.