Usage - Camera recording
19
EN
Usage - Camera recording
• Turn on the inspection camera (see chapter "Switching the inspection
camera on / off").
• Optional: Mounting a tripod (see Chapter "Mounting / Removing the
tripod")
• Coiling the flexible shaft
6
(see chapter "Coiling / uncoiling the flexible
shaft")
• Switch to "Camera recording" mode (see chapter "Selecting the mode").
• Press the "Camera recording" selection button
6
to take a photo.
Switching the LED camera light on / off
• Press the "LED brightness / DOWN"
function switch
8
to increase the
brightness of the LED camera light
24
by one level in the "Camera
recording" mode.
- At maximum brightness, the
LED camera light switches off
if it is pressed again and can
be switched on from level 1 by
pressing it again.
The symbol at the upper left corner of the display indicates the
brightness of the LED camera light
6
in 7 levels.
By default, the LED camera light is configured to level 3 each time the
inspection camera is switched on.
The levels are displayed using the dots next to the symbol.
24
8