83700502
6. CONNECTING THE SCANNER TO A COMPUTER
A USB cable is supplied for connection to a computer.
Use the free BackHome Data Transfer software available at:
https://corporate.virbac.com/home/discover-virbac/
virbac-worldwide.html
In this URL you will find instructions for using this software as
well as instructions for using Bluetooth.
This software allows to transfer data from the scanner to a
computer.
7. CHARGING THE BATTERY
The reader is powered by a rechargeable battery that can
perform several thousand readings. It can be recharged by
connecting the reader to the mini-USB port (2) with the cable
supplied. A red LED (5) indicates that charging is in progress and
a green LED (5) indicates that it is fully charged.
The life expectancy of the battery depends not only on its use,
but also on the environment in which the reader is stored.
You can read the battery charge level on
the indicator in the upper right corner of
the display (5). If the charge is too low, the reader will display
the following message:
Ten more readings are allowed before the scanner
automatically shuts down.
8. PRECAUTIONS FOR USE
• Do not drop the scanner from height or onto a hard surface.
• Do not expose the scanner to excessive moisture.
• Do not expose to liquids that could damage the electronic
circuits.
• Do not place anything on the scanner, which could press a
button continuously and discharge the battery.
• Do not expose the scanner to temperatures above 50°C,
otherwise the screen contrast and color may change, and
reading may become impossible. If the scanner has been
exposed to a high temperature, return it to a normal
environment before further use.
• In the case of failure, check that the battery is not discharged
before returning the scanner for service. The scanner must
always be returned with the warranty form (Address: see
section 10 “After Sales Services”).
• Important note: Return the scanner with its manual in the
original packaging.
• Do not attempt to repair the scanner yourself.
9. TECHNICAL DATA
Dimensions
155 x 82 x 33 mm
Weight
155 g
Operating temperature
-5 °C to 40 °C
Storage temperature
-10 °C to 55 °C
Battery
3.7 V, min. 1400 mAh rechargeable
Reading distance
FDX-B (ISO): Up to 100 mm
FDX-A/FECAVA: Up to 65 mm
HDX: Up to 200 mm
(depending on manufacturer)
Transmission frequency
134.2 kHz
Interface
USB, Bluetooth
Accessories
USB cable
Designed in
France
Made in
China
Conforming to standards
CE, FCC
ISO 11784, 11785
10. AFTER SALES SERVICES
Please visit
Global BackHome website:
https://corporate.virbac.com/home/discover-virbac/virbac-
worldwide.html
or
contact directly your local Virbac subsidiary
LOW BATTERY
83700502-NOTICE-BACKHOME-V800.indd 2
08/09/2020 10:32
