background image

Precaution

Thank you for purchasing this electronic instrument.For perfect operation and 
security, please read the manual carefully and keep it for future reference.

The lightning flash with arrowhead symbol within an equilateral triangle 
is intended to alert the user to the presence of uninsulated 

dangerous 

voltage

within the product s enclosure that may be of sufficient 

magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert 
the user to the presence of important operating and maintenance(servicing) 
instructions in the literature accompanying the product.

Safety Precautions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Important Safety Instructions

1) Read these instructions.       
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, install in 
accordance with the manufacturer s instructions. 
8) Do not install near the heat sources such as 
radiators, heat registers, stoves, or other apparatus 
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized 
or grounding-type plug. A polarizedplug hase two 
blades with one wider than the other. A grounding 
type plug has two blades and a third grounding 
prong. The wide blade or the third prong are 
provided for your safety, if the provided plug does 
not fit into your outlet. consult an electrician for 
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or 
pinched particularly at plugs. convenience receptacles,
and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by 
the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or 
table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when 
moving the cart/apparatus combination to avoid 
injury from tip-over(Figure 1).
13) Unplug this apparatus during lightning storms 
or when unused for a long periods fo time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been 
damaged in any way, such as power-supply cord or 
plug is damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus has 
been exposed to rain or moisture, does not operate 
normally, or has been dropped.   

WARNING

: To reduce the risk of fire or electric 

shock, do not expose this apparatus to rain or moisture.

CAUTION

: Apparatus shall not be exposed to 

dripping or splashing and no objects filled with 
liquids, such as vases, shall be placed on the 
apparatus.
Always make sure all batteries are inserted in  
conformity with the +/- polarity markings.
Always replace all batteries at the same time. Do 
not use new batteries together with old ones. Also, 
do not mix battery types, since this can cause 
overheating, fire, or battery filuid leakage.
Remove the batteries from the instrument if it is 
not to be used for a long time.

 (Figure 1)

Summary of Contents for Hitman Drum1

























Reviews: