7
Every 12 months - change your UV lamp
Descale your WaterBar and change the fi lter (as detailed for ‘every 6 months’ on previous
page), then follow these steps to replace the UV lamp.
Leave your WaterBar switched
on. Remove the lid.
Insert the lamp into the device.
Replace the lid.
Pull the lamp up and dispose of
it in accordance with your Local
Authority guidelines.
Scroll to New Lamp.
Remove the new lamp from
its wrapper. Avoid touching
the lamp itself.
Press OK. The lamp counter
on your WaterBar has now
been reset.
1
4
7
2
5
3
6
Troubleshooting guide
Fault
Action to rectify
1
Slow water fl ow
Remove and re-insert the fi lter, making sure it clicks
into place and fi ts into the fi lter holder completely
•
If the problem persists, contact 0845 301 7700
2
Cold water keeps running for a
while after releasing the button
Wait for about 10 minutes and try again
•
If the problem persists, contact 0845 301 7700
3
The WaterBar will dispense hot
water but not cold water
•
Remove and re-insert the lamp
•
Unplug and re-connect the device to the
power source
•
Press the cold water button
2
1
3
4
5
for 2 minutes in order
to release the air from the cold water tank
•
If the problem persists, contact 0845 301 7700
4
Hot and cold water come out
simultaneously
If you press the cold water
2
1
3
4
5
button but hot water
comes out, dispense hot water for 2-3 minutes and
try again.
If you press the hot water
2
1
3
4
5
button but cold water
comes out, dispense cold water for 2-3 minutes and
try again.
•
If the problem persists, contact 0845 301 7700
OK
7
6
