Virginia Diodes WR5.1 Operational Manual Download

Page: 7 / 16

†

The IF Input Damage Limit (for CCUs) and the RF Input Damage Limit (for CCDs) are the same. The IF Connector is specified here. The RF Test Port specifications are listed

separately in the table above.

††

CCD modules include an IF amplifier with ~12dB gain.

Table 1: General Specifications for VDI CCU and CCD Modules

Description

Specification

Connector

LO Input Port (Typical / Damage)

WR28

0 dBm / 10 dBm

2.92mm (f)

WR19 (Not -B)

0-3 dBm / 6 dBm

2.92mm (f)

WR19 (-B Only)

0-6 dBm / 9 dBm

2.92mm (f)

WR15 (Not -B)

0-6 dBm / 9 dBm

2.92mm (f)

WR15 (-B Only)

0-6 dBm / 9 dBm

2.92mm (f)

WR15 (-B-M4 Only)

0-6 dBm / 9 dBm

2.92mm (f)

WR12 (Not -B)

0-6 dBm / 9 dBm

2.4mm (f)

WR12 (-B Only)

0-6 dBm / 9 dBm

2.4mm (f)

WR12 (-B-M4 Only)

0-6 dBm / 9 dBm

2.92mm (f)

WR10 (Not -B)

6-12 dBm / 15dBm

1.85mm (f)

WR10 (-B Only)

0-6 dBm / 9 dBm

2.92mm (f)

WR8.0 to WR2.2 (Not WR3.4CCU/CCD)

0-6 dBm / 9 dBm

2.92mm (f)

WR3.4CCU/CCD (Not -M12)

0-6 dBm / 9 dBm

1.85mm (f)

IF Input Power Damage Limit
(for CCUs)

†

RF Input Power Damage Limit
(for CCDs)

†

WR28

10 dBm

2.92mm (f)

WR19

6 dBm

2.92mm (f)

WR15 to WR10 (Not -B)

0 dBm

2.92mm (f)

WR15 to WR10 (-B Only)

12 dBm

2.92mm (f)

WR8.0 to WR3.4

6 dBm

2.92mm (f)

WR2.2

0 dBm

2.92mm (f)

IF Frequency

CCU

~10 MHz (min.), See Table 2 for Max IF

CCD

~100 kHz (min.), See Table 2 for Max IF

RF Test Port

VDI Precision Flange

WR15 and Higher Frequency

UG-387/UM

WR28 to WR19

UG-599/UM

Default E-Field Polarization

WR28 to WR10 (Not -B)

Horizontal

All Others

Vertical

IF Amplifier Gain (dB)

††

For CCDs Only

~12dB

AC Inputs

Single-Volt Power Supply ( +9V / 4A)

100-240VAC, 3.5A, 50-60Hz

U.S. or E.U.

Maximum Weight

2.0 Lbs. (0.91 Kg.)

Dimensions (Enclosure, without
Connectors, L x W x H)

WR28 to WR10 (Not Including CCU-B and
CCD-B Modules)

3.75” x 3.00” x 1.50”
(See VDI Website for Drawing)

All Others

5.00” x 3.50” x 1.50”
(See VDI Website for Drawing)

Operating Temperature

Typical / Recommended

25⁰C / 20-30⁰C

General Specifications

Sec-2

Pg-7

Summary of Contents for WR5.1

















Search results

Summary of Contents for WR5.1

Reviews:

Related manuals for WR5.1

Brands by name

Popular brands

Virginia Diodes WR5.1, Operational Manual

Search results

Summary of Contents for WR5.1

Reviews:

Related manuals for WR5.1

Brands by name

Popular brands