______________ USER’S MANUAL SOLO Airliner_____________
Start turbo-prop engines (using MFS / P3D)
1.
Pull on the
PARKING BRAKE
2.
Move the
MIXTURE
handle
to RICH
3.
Move the
PROP RPM
handle
to
HIGH
4.
Move the
POWER
handle to
DEC
5.
Switch on the
BAT
6.
Switch on the
L ENG “START”
7.
The turbine will begin to rotate, after about 5-6 seconds activate
FUEL VALVE “LEFT”.
8.
Once the left engine is running switch off the
L ENG “START”
9.
Switch on the
GEN 1
to charge the batteries.
10.
Switch on
M. AVIONICS
This procedure has started the single engine if it is a single-engine airplane or the left engine if it is a
twin-engine plane, in the latter case do the indications 6,7,8,9 to start the right engine.
¡IMPORTANT!
Before activating GEN do not f
orget to disable START, if don’t do that the generator will
not charge the batteries.
Stop turbo-prop engines (using MFS / P3D)
1.
Pull on the PARKING
BRAKE
2.
Switch off the
FUEL VALVE/S
3.
Move the
MIXTURE
handle
to CUTOFF
4.
Switch off the
M. AVIONICS
5.
Switch off the
GEN/S
6.
Switch off the
BAT
Summary of Contents for SOLO Airliner
