background image

5

VIRTUBE VT30FX/VT15FX/VT15CD User Manual

1.  Introduction

The demands placed on a guitar amp are nowadays very broad. A guitarist should 

offer a wide array of sounds. That’s why it is very important to us to be able to 

offer you maximum sound diversity as well as a variety of connection possibilities 

with your VIRTUBE. Don’t worry: you will quickly master the VIRTUBE and learn 

how to use all of its capabilities easily and intuitively. With its up-to-date 

circuitry, the VIRTUBE features the functionality and reliability of a truly modern 

guitar amp.

VTC Virtual Tube Circuitry

The specially developed VTC Virtual Tube Circuitry gives your sound the unique 

vintage flavor of classic tube amps.

1.1  Before you get started

Your product was carefully packed at the factory to ensure safe transport. 

Nevertheless, if the box is damaged inspect the unit immediately for signs 

of damage.

◊ 

If the unit is damaged please do NOT return it to us, but notify your 
dealer and the shipping company immediately; otherwise, claims for 
damage or replacement may not be granted.

◊ 

Otherwise, always use the original box to prevent damage during 
storage or transport.

◊ 

Make sure that children cannot play unsupervised with the unit or 
its packaging.

◊ 

Please ensure proper disposal of all packing materials. 
Recylce whenever possible.

Ensure adequate air supply and to avoid overheating do not place the unit near 

radiators etc.

◊ 

Please make sure that all devices are properly grounded / earthed. 
For your own safety, never remove or disable the ground/earth 
conductors from the devices or on the power cords. The unit 
must always be connected to the mains outlet with a protective 
grounding connection.

1.1.1  Online registration

Please register your new BEHRINGER equipment right after your purchase 

by visiting http://behringer.com and read the terms and conditions of our 

warranty carefully. 
Should your BEHRINGER product malfunction, it is our intention to have it 

repaired as quickly as possible. To arrange for warranty service, please contact 

the BEHRINGER retailer from whom the equipment was purchased. Should your 

BEHRINGER dealer not be located in your vicinity, you may directly contact 

one of our subsidiaries. Corresponding contact information is included in the 

original equipment packaging (Global Contact Information/European Contact 

Information). Should your country not be listed, please contact the distributor 

nearest you. A list of distributors can be found in the support area of our website 

(http://behringer.com). 
Registering your purchase and equipment with us helps us process your repair 

claims more quickly and efficiently. 

Thank you for your cooperation!

2.  Control Elements

(3)

(4)

(5) (6) (8)

(9)

(

10

)

(

11

)

(

12

)

(

16

) (

17

) (

18

) (

19

)

(

20

)

(

14

)

(

15

)

(2)

(7)

(13)

(1)

Fig. 2.1: VIRTUBE control elements (front panel)

2.1  Front panel

(1) 

The 

INPUT

 socket is the 1/4" connector for your guitar. Please use a standard 

1/4" TS connector.

2.1.1  CLEAN channel

(2) 

The 

CLEAN 

CHANNEL LED lights up when the channel is active.

(3) 

The 

VOLUME

 control determines the volume of the CLEAN channel. 

(4) 

The 

BASS

 control in the EQ section allows you to raise or lower the bass 

frequencies on the CLEAN channel (VT30FX only).

(5) 

The 

TREBLE

 control adjusts the treble frequencies on the 

CLEAN channel (VT30FX only).

(6) 

Press the 

CHANNEL

 button to switch between the CLEAN and OVERDRIVE 

channels. The channel LED lights up when the channel is activated. 

With all models you can also switch between channels using the 

footswitch provided.

2.1.2  OVERDRIVE channel

(7) 

The 

OVERDRIVE 

CHANNEL LED lights up when the channel is active.

(8) 

The 

GAIN

 control determines the amount of gain applied and hence the 

degree of distortion in the OVERDRIVE channel.

(9) 

The 

BASS

 control in the EQ section allows you to raise or lower 

the bass frequencies.

(10) 

Use the 

CONTOUR

 control (VT15FX / VT15CD: MID) for additional, 

highly characteristic adjustment of the midrange, so as to easily create 

traditional as well as ultra-modern guitar sounds.

Summary of Contents for VT15CD












Reviews: