background image

EN

VirtuFit CTR 1.2i Crosstrainer

18

SPEED KM/H(M/H)
Showing your current speed. Range: 0.0 ~ 99.9 KM/H(M/H).

RPM
Showing the current rotate per minute. Range: 0~999.

TIME
The accumulative exercise time, range : 0:00~99M59S. the preset time range is 5:00~99M00S. The computer 
will start to count down from preset time to 0:00. With average time for each resistance level. When it 
reaches to zero, the program will stop and computer. alarm. If you do not preset the time, it will run with 
one minute decrement each resistance level.

DIST
The exercise accumulative distance. Range : 0.0~99.9~999KM(MILE) the preset distance  range: 

 

1.0~99.0~999. When the distance reaches 0, the program will stop and the computer will alarm.

CALORIE
The exercise accumulative calories burnt. Range : 0.0~99.9~999 the preset calories range :10.0~90.0~990.
When the calorie reaches 0, the program will stop and the computer will alarm.

PULSE
Showing the exercise heart rate value. Range: 60~240BPM(beat per minute).

RESISTANCE LEVEL
Showing level. Range:1~16

WATT
Show the exercise watt,the interval should be 10,between 30-350

ADAPTER
iNPUT: AC 230V
OUTPUT: 8 VDC 500mA

CONTROL PANEL

SPECIFICATIONS

Summary of Contents for CTR 1.2i





























Reviews: