TITEL HOOFDSTUK
EN
VirtuFit CTR 3.0i Elliptical Trainer
15
LEVELING THE DEVICE
MOVING THE DEVICE
Always make sure that the elliptical cross trainer is on a stable surface. If in doubt, you can always place a
rubber mat under your cross trainer so that you get more grip on your floor. If you do need to adjust the
crosstrainer slightly, you can compensate the crosstrainer for the uneven surface with a simple turn of the
adjustable ends on both sides of the frame.
To move the elliptical, apply pressure to the handlebars until the transport wheels on the front stabilizer
touch the ground. With the transport wheels on the ground, you can easily transport the elliptical to the
desired location.
ADJUSTMENTS GUIDE
TRAINING ON HEART RATE
5kHz and and pulse sensors
This VirtuFit fitness equipment is provided with hand pulse sensors for measuring the heart rate. The hand
pulse sensors are located on the handlebars. The hand pulse sensors are only working if they are touched
both at the same time for a couple of seconds. For accurate measurement it is important to have slightly
moist hands and to use a constant pressure on the sensors. Too dry or too moist hands can result in less
accurate measurement of the heart rate.
