background image

EN

VirtuFit Elite Comfort Treadmill

28

CONTROL PANEL

24 

186 

118 

118 

44 

167 

106 

106 

67 

145 

92 

92 

25 

185 

117 

117 

45 

166 

105 

105 

68 

144 

91 

91 

26 

184 

116 

116 

46 

165 

104 

104 

69 

143 

91 

91 

27 

183 

116 

116 

47 

164 

103 

103 

70 

143 

90 

90 

28 

182 

115 

115 

48 

163 

103 

103 

71 

142 

90 

89 

29 

181 

115 

115 

49 

162 

103 

103 

72 

141 

90 

89 

30 

181 

114 

114 

50 

162 

102 

102 

73 

140 

90 

88 

31 

180 

113 

113 

51 

161 

101 

101 

74 

139 

90 

88 

32 

179 

113 

113 

52 

160 

101 

101 

75 

138 

90 

87 

33 

178 

112 

112 

53 

159 

100 

100 

76 

137 

90 

86 

34 

177 

112 

112 

54 

158 

100 

100 

77 

136 

90 

86 

 

 

 

 

55 

157 

99 

99 

78 

135 

90 

85 

 

 

 

 

56 

156 

98 

98 

79 

134 

90 

85 

 

 

 

 

57 

155 

98 

98 

80 

133 

90 

84 

L-H: HEART RATE RANGE (LOWEST-HIGHEST).

1.  In standby mode, press “PROGRAM” button continuously until HRC appears in distance window.

NOTE: 

AIf you press “START” directly under HRC mode, the system will recommend a parameter under 

age 30target heart rate 114 and max speed 10Km/h.

2.  After choose HRC program, press “MODE” for three seconds to enter into age setting. Time window will  
  show default age 30. You can reset by pressing “-” and “-SPEED+” buttons. Age setting range  
  is from 15 to 80.
3.  After setting age, press “MODE”, system will recommend a suitable target heart rate for reference. You  
  can reset from 84 to195 by pressing “-” or “-SPEED+”.
4.  After setting target heart rate, press “MODE” to set maximum speed by pressing “-” or  
  “-SPEED+”. Speed setting range is 3.0-18.0Km/h.
5.  After setting maximum speed, press “MODE” to enter into time setting. “TIME”window will show  
  default time10:00, press “-” or “-SPEED+” to reset from10:00 to 99:00.
6.  After setting the above data, press “MODE” to enter standby mode and press “START” to begin exercise. 
  All the setting data is for single use, when finish running, the date will swept off.
7.  You can adjust the incline and speed during exercise by“-SPEED+” and “-”. But the system will  
  change the speed and incline automatically according to the target heart rate.

Summary of Contents for Elite Comfort









































Reviews: