EN
VirtuFit Elite FDR 2.4i Crosstrainer
17
20). User may keep exercising to improve the heart rate recovery status. (Press the RECOVERY button again
to return the main display).
BODY FAT
1. In STOP mode, press the BODY FAT key to start body fat measurement.
2. Console will remind to input user GENDER (Drawing 21), AGE, HEIGHT, WEIGHT, then begin to measure.
3. During measuring, users have to hold both hands on the hand grips. And the LCD will display “= ” “=
= ” (Drawing 22)for 8 seconds until computer finish measuring.
4. LCD will display BODY FAT advice symbol, BODY FAT percentage (Drawing 23), BMI (Drawing 24) for
30 seconds.
5. Error message:
* The LCD displays “= = ” “ = =” (Drawing 25) –
Not hand the grip or wear chest strap correctly.
* E-1 –
There is no heart rate signal input detected.
* E-4 –
Occurs when FAT% is below 5 or exceeds 50, BMI result is below 5 or exceeds 50 (Drawing 26).
3.
During measuring, users have to hold both hands on the hand grips. And the LCD will display “= ” “= = ”
(Drawing 22)
for 8
seconds until computer finish measuring.
4.
LCD will display BODY FAT advice symbol, BODY FAT percentage
(Drawing 23)
, BMI
(Drawing 24)
for 30 seconds.
5. Error message:
*The LCD displays “= = ” “ = =”
(Drawing 25)
–
means not hand the grip or wear chest strap correctly.
*E-1
–
There is no heart rate signal input detected.
*E-4
–
Occurs when FAT% is below 5 or exceeds 50 and BMI result is below 5 or exceeds 50
(Drawing 26)
.
Drawing 21
Drawing 22
Drawing 23
Drawing 24
Drawing 25
Drawing 26
APP
i Training
1. This console can connect APP on the smart device by Bluetooth.
2. Once console is connect to smart device via Bluetooth , the console will don’t display.
3.
During measuring, users have to hold both hands on the hand grips. And the LCD will display “= ” “= = ”
(Drawing 22)
for 8
seconds until computer finish measuring.
4.
LCD will display BODY FAT advice symbol, BODY FAT percentage
(Drawing 23)
, BMI
(Drawing 24)
for 30 seconds.
5. Error message:
*The LCD displays “= = ” “ = =”
(Drawing 25)
–
means not hand the grip or wear chest strap correctly.
*E-1
–
There is no heart rate signal input detected.
*E-4
–
Occurs when FAT% is below 5 or exceeds 50 and BMI result is below 5 or exceeds 50
(Drawing 26)
.
Drawing 21
Drawing 22
Drawing 23
Drawing 24
Drawing 25
Drawing 26
APP
i Training
1. This console can connect APP on the smart device by Bluetooth.
2. Once console is connect to smart device via Bluetooth , the console will don’t display.
3.
During measuring, users have to hold both hands on the hand grips. And the LCD will display “= ” “= = ”
(Drawing 22)
for 8
seconds until computer finish measuring.
4.
LCD will display BODY FAT advice symbol, BODY FAT percentage
(Drawing 23)
, BMI
(Drawing 24)
for 30 seconds.
5. Error message:
*The LCD displays “= = ” “ = =”
(Drawing 25)
–
means not hand the grip or wear chest strap correctly.
*E-1
–
There is no heart rate signal input detected.
*E-4
–
Occurs when FAT% is below 5 or exceeds 50 and BMI result is below 5 or exceeds 50
(Drawing 26)
.
Drawing 21
Drawing 22
Drawing 23
Drawing 24
Drawing 25
Drawing 26
APP
i Training
1. This console can connect APP on the smart device by Bluetooth.
2. Once console is connect to smart device via Bluetooth , the console will don’t display.
3.
During measuring, users have to hold both hands on the hand grips. And the LCD will display “= ” “= = ”
(Drawing 22)
for 8
seconds until computer finish measuring.
4.
LCD will display BODY FAT advice symbol, BODY FAT percentage
(Drawing 23)
, BMI
(Drawing 24)
for 30 seconds.
5. Error message:
*The LCD displays “= = ” “ = =”
(Drawing 25)
–
means not hand the grip or wear chest strap correctly.
*E-1
–
There is no heart rate signal input detected.
*E-4
–
Occurs when FAT% is below 5 or exceeds 50 and BMI result is below 5 or exceeds 50
(Drawing 26)
.
Drawing 21
Drawing 22
Drawing 23
Drawing 24
Drawing 25
Drawing 26
APP
i Training
1. This console can connect APP on the smart device by Bluetooth.
2. Once console is connect to smart device via Bluetooth , the console will don’t display.
CONTROL PANEL
Drawing 15
Cardio Mode
1.
Use UP or DOWN (Encoder)
to select workout program, choose H.R.C. and press
MODE / ENTER
to get into.
2.
Use UP or DOWN (Encoder)
to set Age (Drawing 16).
3.
Use UP or DOWN (Encoder)
to select 55% (Drawing 17).75%.90% or TAG (TARGET H.R.) (default: 100).
4.
Use UP or DOWN (Encoder)
to set workout TIME.
5. Press START/STOP key to start or stop workout.
Use
RESET to reverse to main menu.
Drawing 16
Drawing 17
Watt Mode
1.
Use UP or DOWN (Encoder)
to select workout program, choose WATT and press
MODE / ENTER
to get into.
2.
Use UP or DOWN (Encoder)
to set WATT target. (default: 120, Drawing 18)
3.
Use UP or DOWN (Encoder)
to set TIME.
4. Press START/STOP key to start workout.
Use UP or DOWN (Encoder) to adjust Watt level.
5. Press START/STOP key to pause workout.
Use
RESET to reverse to main menu.
Drawing 18
RECOVERY
After exercising for a period, keep holding on hand grips or wearing chest strap and press RECOVERY key. All function display will
stop except “TIME” starts counting down from 00:60 to 00:00
(Drawing 19)
. Screen will display your heart rate recovery status
with the F1, F2
…
. to F6. F1 is the best, F6 is the worst
(Drawing 20)
. User may keep exercising to improve the heart rate
recovery status. (Press the RECOVERY button again to return the main display.)
Drawing 19
Drawing 20
BODY FAT
1.
In STOP mode, press the BODY FAT key to start body fat measurement.
2.
Console will remind to input user GENDER
(Drawing 21)
, AGE, HEIGHT, WEIGHT, then begin to measure.
19
21
23
25
20
22
24
26
