EN
Virtufit Indoor Cycle S2i Spinbike
19
7. If select CARDIO function(15), press MODE confirm to next step,and press UP/DOWN to set age, and
then press MODE confirm to next screen (Figure16). Set CARDIO 55%~TAG (Figure17). Press UP/DOWN
to choose CARDIO 55%, and press MODE confirm to enter this mode. And press UP/DOWN to adjust and
set TIME or press START directly to start workout. When there is no PULSE signal input in six seconds
after START is executed, LCD will display “PULSE INPUT” to prompt the user (Figure 18).
8. If choose WATT function (Figure 19), press MODE confirm to next step. And set WATT (10~350±5), press
UP/DOWN to set (default value 120, Figure 20) and press MODE to confirm. And go to next step to set
TIME (1~99 minutes) or press START to execute function; After START, according to the WATT value and
practice state input by the user, the LEVEL value is automatically adjusted (Figure 21), and the WATT
value can be adjusted by pressing the UP or DOWN button.
FIGURE 15
FIGURE 16
FIGURE 17
FIGURE 18
FIGURE 13
FIGURE 14
CONTROL PANEL
