4
VirtuFit RB 1.0 Recumbent Bike
ENG
ASSEMBLY INSTRUCTION
STEP 1
Fix the front stabilizer (8) & the rear stabilizer (6) respectively onto the front main frame (1) the rear main
frame (2) with the carriage bolt (9), arc washer (10) and Acorn nut (11).
Open the box and remove all parts from the packaging and place them on the floor.
Missing parts: If you think you are missing certain parts in your package, carefully check the styrofoam and
the device yourself. Some parts (bolts, screws, etc.) are already attached to / in the device.
Trappers: A left-hand trapper is tightened by turning to the left and a right-hand trapper by turning to the
right. If you turn the left-hand pedal clockwise, there is a chance that you will damage the thread of this
trapper, so that the trapper can no longer be placed on it.
Hexagon socket screws: In the recumbent bike there are hex bolts, make sure that the hex key is properly
inserted into the bolt before applying force to the key. In this way you prevent the head of the socket head
from being turned.
