5.
WARNING:
If the liquid spills from the mouth of the reservoir and
soaks the reservoir’s exterior, and the operator’s clothing
and body, it is susceptible to electrostatic leaks that irritate
the skin. Therefore, it is essential to tighten the lid of the
reservoir after filling and prevent spillage from the mouth
of the reservoir during operation. Keeping the exterior of
the reservoir dry and clean is vital to ensure the
electrostatic absorption and comfortable handling of the
sprayer.
I) Safety and Operational Considerations
●
Attention must be paid to the filtration of liquid and
water to avoid clogging the nozzle and affecting
operation. If the nozzle is blocked, the particles
must be removed before starting the machine
operation.
●
Operators must be aware of the properties and
protective methods used to avoid direct physical
contact with chemicals. Spraying with chemicals
that have a corrosive effect on plastics and metals
should be avoided. Do not spray with wettable
powder to prevent clogging the nozzle.
●
After the electrostatic sprayer has been used, the
interior of the drum and the injection system shall
be cleaned and wiped down with water promptly
before being placed in an appropriate storage
location. Cleaning method: fill the reservoir with
water and spray the machine for 15-seconds, pour
out the remaining water and wipe clean.
6.
●
Do not submerge the pump or battery in water. Do
not use the electrostatic sprayer in a flammable or
explosive environment.
●
Care should be taken to keep the exterior of the
reservoir and the wand in a clean and dry condition
during operation and prohibit physical contact with
passers-by during the process. Do not touch the
spray rod or the charging socket with your hand
during operation.
●
After operating, the handle switch should be
turned off, then turn off the electrostatic/pump
switch on the reservoir.
●
After charging, leave it for 10-minutes before using.
The battery should be charged for maintenance at
least once-a-month. Proper use and maintenance
of the battery can significantly extend the life of the
battery.
●
The machine is equipped with tens of thousands of
high-voltage electricity and disassembly of the
machine is strictly prohibited.
●
The use of special working fluids, such as strong
acids and bases, is not permitted.
●
Chemicals should be used following the safety
instructions provided by the manufacturer.
