8
LRT84H MODEL
- LRT84H orbital/rotaryorbital sander with electronic
speed adjustment.
- Allen service key e/c: 4 mm.
- Mobile base sander set with Velcro delta pad 8445498.
- Velcro rotaryorbital base 8445598
- Suction bag set
- Instruction manual and other documentation
- 1 abrasive sheet for mobile base
- 2 Velcro abrasive sheets for Delta base
- 1 Velcro abrasive disk
LRE84H MODEL
- LRE84H orbital sander with electronic speed adjustment
- Allen service key e/c: 4 mm.
- Mobile base sander set with Velcro delta pad 8445498.
- Suction bag set
- Instruction manual and other documentation
- 1 abrasive sheet for mobile base
- 3 Velcro abrasive sheets for Delta base
LR84H MODEL
- LR84H orbital sander machine without electronic
speed adjustment.
- Allen service key e/c: 4 mm.
- Mobile base sander set with Velcro delta pad 8445498.
- Suction bag set
- Instruction manual and other documentation
- 1 abrasive sheet for mobile base
- 3 Velcro abrasive sheets for Delta base
4. ACCESSORIES
- Mobile base 8402434
- Delta Velcro mobile base 8445198
- Mobile base sander set with Velcro delta pad 8445498.
Optional:
- Velcro Rotaryorbital Base Plate 8445598 (Included
with model LRT84H)
- Velcro adaptor 8499211
- LR84H centring and abrasive drilling device 8445232
- Standard dust collection attachment 6446073 2.25 m
- Standard dust collection attachment 1746245 5 m
5. SAFETY INSTRUCTIONS FOR
HANDLING THE MACHINE
Before using any of the sander models,
carefully read the GENERAL SAFETY INS-
TRUCTION BROCHURE which is included
with the machine documentation.
2. The voltage must correspond to the data indicated
on the feature plate.
3. Danger! Keep hands away from working area. Do not
hold the machine from underneath while it is running.
4. It is advisable to use only original VIRUTEX abrasives.
5. Inspect wood and remove any nails before sanding.
6. Never use the sanding machine in the presence of
liquids or excessive humidity.
7. Never leave an electric tool before all moving parts
have come to a complete stop.
8. The dust that accumulates during the sanding process
may prove to be toxic or harmful to the health (for
example, in the case of lead-based paints, certain woods
or metals). Use the dust collector connection at all times.
9. REPLACEMENT PARTS: Use only original replacement
parts.
6. STARTING THE MACHINE AND
ELECTRONIC ADJUSTMENT
To start the machine, move switch "B" to the right.
To adjust the speed electronically in models LRT84H
and LRE84H, turn button "A" to the desired working
speed (Fig. 1).
7. MOUNTING THE BASE PLATES
MOBILE BASE SANDER SET WITH VELCRO DELTA PAD
8445498
VELCRO MOBILE BASE 8445189
To assemble the mobile base sander set with Velcro delta
pad ref. 8445498, first remove screw "F" and washer "G"
using service key "H" (Fig. 2). Next, remove the aluminium
base, along with pad "D", which is fitted (Fig. 2), and
attach the mobile base sander set with the Velcro delta
pad, using screw "F" and washer "G", as shown in (Fig. 3).
When the machine is fitted with the rotary orbital
base plate, follow the same procedure to assemble any
of the pads.
To attach the mobile base with Velcro accessory ref.
8445189, remove screws "C" (Fig. 2), remove standard
sanding pad "D" and attach the pad with the Velcro
accessory using screws "C".
VELCRO ROTARYORBITAL BASE 8445598
To attach this accessory, first remove screw "F" and
washer "G" using the service key "H" (Fig. 3). Remove the
aluminium base along with base "D" or "E" whichever
is installed at the time (Fig. 2 and 3) and take away the
4 aluminium columns pulling them out. As next step
insert base "I" (Fig. 5) and centre it using drag "J" (Fig.
4). Secure it in it's place with screw "F" and washer "G"
as indicated in (Fig. 5).
To install one of these bases when the machine is equipped
with the rotaryorbital plate, the procedure is the same.
8. INSTALLING SANDPAPER
ON THE 8402434 MOBILE BASE
Pinch the pincers "K" (Fig. 6) and insert the sandpaper
as indicated. It is important to ensure that the orifices
of the sandpaper coincide with those of the machine
base and that the sandpaper is perfectly taut on the
