Running Chases:
Manual Mode
1.
When the power is turned on, the unit enters manual mode automatically.
2.
Select the chase you wish to run by pressing the corresponding chase button.
Pressing this button second time will release the chase.
Auto Mode
1.
Press the “Auto/Del” button to activate Auto Mode.
2.
Select the desired chase by pressing one of six chase buttons. Press this
button a second time will cancel this selection.
3.
Use the “Speed” and “Fade” time sliders to adjust the chase to your
specifications.
Music Mode
1.
Press the “Music/Bank Copy” button to activate music mode.
2.
Select the desired chase by pressing one of the six chase buttons. This will
activate the chase and cause it to respond to the rhythms of the music.
Technical Specifications:
Power Input: DC 9-12V 500mA Min
DMX In/Out: 3 Pin female/male XLR socket X 1
Midi In: 5 Pin multiple socket
Dimensions: 570x185x120mm
Weight: 3kgs
Product Descriptions
To optimize the performance of the controller 192, please read these operating
instructions carefully to familiarize yourself with the basic operations of the unit.
It has been tested at the factory before being shipped to you, so there is no
assembling needed. Functions include
-192 DMX channels
-12 Scanners of 16 channels each
-30 banks of 8 programmable scenes
-6 programmable chases of 240 scenes
-8 sliders for manual control of channels
-Auto mode program controlled by speed and fade time sliders
-Fade time/speed
-Blackout master button
-Reversible DMX channels allows fixtures on the fly
-Built in microphone for music triggering
-Midi control over banks, chases, and blackout
-DMX polarity selector
-Power failure memory
Read the instructions in this manual carefully and thoroughly, as it gives
important information regarding safety during use and maintenance.
Please keep this manual with the products for future reference.
