Spraying System eco-CONTROL SC1200
Commissioning and maintenance manual
Copyright
©
9 / 16
• Set the Teach-In function:
The Teach-In Function can be switched ON / OFF and is only in MANUAL mode
useable. By activated function, the dispense time will be added to the actual
dispense time with every new dispensing signal. To Reset the dispense time to
0,00 sec. please press SAVE + DOWN key together.
• Cycle counter:
The cycle counter counts dispensings after switching ON the SC1200. After
power reset, the counter will be set to 000000.
• Key lock:
By pressing SAVE + PRG the same time, a key lock for the SC1200 can be acti-
vated. An activated key lock is shown in the display (lower right hand corner)
with the symbol:
By pressing SAVE + PRG again, the key lock can be deactivated.