Viscount CANTICUS I - II
48
5.2 MODIFYING VOICE PARAMETERS
To access timbre modification, first press the TAB key located on the right section of the central control unit.
The display will now be divided into 3 columns corresponding to the 3 sections of the organ (pedal keyboard, man. I and
man. II): the name of the section appears at the top of each column, and the name of the first voice in the section at the
bottom.
Use the
Õ and Ö cursor keys to locate the cursor under the section containing the voice to be modified.
Turn the Encoder to scroll through all the voices in the chosen section until the name of the voice for modification appears
on the display.
At this point, press the PAGE
× key and all the modification parameters described in point 5.1 will appear on the first line
of the display, with the current value of each parameter below.
4* 0* 0& ,) !& 32 -* 2) #* ,"
O>
O;
M;
O9
M;
<
99
:
Then use the cursor keys and the encoder respectively to select and modify the parameters as described in point 5.1.
Finally, press the PAGE
Ø key to return to voice selection. Press EXIT to return to the main video page (volume level
control).
TAB Key
PAGE Key
