71
Viscount Concerto III - Operating Manual
instrument is used by more than one organist, since each of them will be able to save his or her
own settings inside a memory bank.
For the memory saving procedure, see point 17.
The memories also include an [HR] button, also known as 0, which recalls the stop, Coupler
and Orchestra voice setup before a memory is activated.
17. [S] button:
“Set” button which enables the saving of memories. To save a memory, simply
press the [S] button, keep it pressed and then press the button of the memory you wish to save,
which may be either dedicated or general.
18. [P] buttons:
these buttons activate the couplings of the manuals with the pedal board, as follows:
o
[P]
(18a)
:
coupling of the third manual with the pedal board (III/P).
o
[P]
(18b)
:
coupling of the second manual with the pedal board (II/P).
o
[P]
(18c)
:
coupling of the first manual with the pedal board (I/P).
19. Second manual couplers:
these buttons activate the couplings with Man.II, as follows:
o
[III]:
coupling of the third manual with the second (III/II).
o
[I]:
coupling of the first manual with the second (I/II).
20. [III] button:
this button enables the coupling of the third manual with the first (III/I).
21. [ENC] button:
pressing this button allows you to control the organ’s general volume by means
of the [MAN.III] pedal.
22. [A.P.] button:
this button enables the AUTOMATIC PEDAL, used to play the stops and the
Orchestra voice of the pedal board using the first 32 notes of Man.II. In this case the pedalboard
is disactivated and the Pedal voices play monophonically on the lowest note of Man. II.
23. [C] button:
“Cancel” button, which switches off any stops, couplers and Orchestra voices
which may be on.
24. [T] button:
“Tutti” button, which enables a preset series of stops, couplers and Orchestra voices.
The voice composition of the Tutti function is programmable. To save a new setup, switch on
the stops, couplers and Orchestra voices (in the version with Orchestra voices) of your choice,
press [S], keep it pressed and then press the [T] button or the [TUTTI] foot piston.
25. Display functions floppy disk drive:
use only 720 Kb or 1.44 Mb 3.5" floppy disks.
