79
Viscount Concerto III - Operating Manual
4. FUNCTIONS FOR CONTROLLING THE ORGAN’S VOICES
One major innovation of the Concerto III organ is that it allows the user to load church organ voices
to replace those initially loaded by our workshops by just recalling a display function and using the
relevant floppy disks.
This means you will be able to set your organ’s entire voice setup exactly as you wish and at any
time, with considerable advantages for the customisation of the instrument, and for its use by more
than one organist (each of them will be able to have their own set of voices).
All the functions for controlling the organ’s voices can be recalled by pressing the [VOICES]
button underneath the display. This will call up the video page:
These functions are:
o
LOAD VOICE FROM DISK:
function for loading voices from disk.
o
SORT MANUAL:
sorts the voices.
o
VOICES VOLUME:
regulates the volume of each individual voice.
o
LABEL CHECK:
allows checking of the labels of the stops after new voices have been loaded
and/or after a voice sort.
To recall the function, place the cursor on the field required using the [CURSOR] keys and press
[ENTER/YES]. Otherwise, press the [VOICES] or [EXIT/NO] buttons to return to the main video
page.
4.1 LOADING VOICES FROM DISK
To load voices, insert the relevant floppy disk in the drive, select the LOAD VOICE FROM DISK
option in the VOICES menu and press [ENTER/YES]. The system will then verify the contents of
the disk:
and if it contains files for the installation of new voices, these will be shown on the display.
