Viscount Prestige 50, Quick Manual

18

Viscount                    - Quick Guide

Prestige 50

As the display states, the number to the left of the “/”symbol represents the Depth, while the number

to the right is the Speed. To change the values use the [CURSOR] buttons to move the cursor and

the encoder [VALUE].

After making all the changes required, press [ESC] to return to the SET-UP menu and to save the

new settings.

4.2 SELECTING THE TYPE OF REVERB

The REVERBERATION TYPE function allows eight types of reverb to be selected, with different

diffusion and propagation of the reverberated signal, which can be used to simulate the reverberation

of the sound generated by the organ in different ambient settings.

As described in chap. 3, the [REVERB] potentiometer on the centre panel is used to adjust the level

of reverb.

To set the type of ambient effect required, select the REVERB field in the SET-UP menu and press

[ENTER] the following page will appear:

REVERBERATION type:Cathedral

Use the encoder to select the type of reverb and press [EXIT] to save the selection and return to the

SET-UP menu.

NOTE

The organ’s internal reverb also affects the Orchestra voices and any incoming signals through
the [INPUT] sockets on the rear panel and underneath the manuals.

GREAT/SWELL KEYBOARDS INVERSION:disable

4.3 GENERAL SETTINGS FOR THE MANUALS

The KEYBOARDS SETTING function contains three main parameter settings for the manuals

and the pedal board. The first of these, which can be called up by selecting the KEYBOARDS

SETTING field from the SET-UP menu, is RANKS DISTANCE (described in the “Advanced

Manual”).

Now by pressing the CURSOR [

q

] button the KEYBOARDS INVERSION parameter can be

called up.