TSOP362..
www.vishay.com
Vishay Semiconductors
Rev. 2.3, 18-Oct-11
1
Document Number: 82187
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
IR Receiver Modules for Remote Control Systems
MECHANICAL DATA
Pinning
1 = GND, 2 = GND, 3 = V
S
, 4 = OUT
DESCRIPTION
The TSOP362.. series are miniaturized SMD-IR receiver
modules for infrared remote control systems. PIN diode and
preamplifier are assembled on lead frame, the epoxy
package is designed as IR filter.
The demodulated output signal can directly be decoded by
a microprocessor. TSOP362.. is the standard IR remote
control SMD-receiver series, for 3 V supply voltage
supporting all major transmission codes.
This component has not been qualified according to
automotive specifications.
FEATURES
• Photo detector and preamplifier in one package
• Internal filter for PCM frequency
• Continuous data transmission possible
• TTL and CMOS compatibility
• Output active low
• Low power consumption
• High immunity against ambient light
• Supply voltage: 2.7 V to 5.5 V
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
SPECIAL FEATURES
• Improved immunity against ambient light
• Suitable burst length
≥
10 cycles/burst
• Taping available for topview and sideview assembly
BLOCK DIAGRAM
APPLICATION CIRCUIT
16797
1
2
3
4
PARTS TABLE
CARRIER FREQUENCY
STANDARD APPLICATIONS (AGC2/AGC8)
36 kHz
TSOP36236
38 kHz
TSOP36238
40 kHz
TSOP36240
56 kHz
TSOP36256
30 k
Ω
V
S
OUT
Demo
-
GND
pass
AGC
Input
PIN
Band
dulator
Control circuit
3
4
1; 2
16839
C
1
=
4.7 µF
TSOPxxxx
GND
Circuit
µC
R
1
= 100
Ω
+ V
S
GND
Transmitter
with
TSALxxxx
V
S
R
1
and C
1
recommended to suppress power supply
disturbances. The output voltage should not be
hold continuously at a voltage below V
O
= 2.0 V
by the external circuit.
V
O
17170
OUT
