BewellConnect - BW-BT1 - User Manual - 2018-03_V1
BewellConnect - BW-BT1 - User Manual - 2018-03_V1
32
33
Notes:
- If you want to stop the blood pressure measurement at any point, press the ON /START to turn it off.
- Speak to your doctor if you have any questions about using the blood pressure monitor.
- You can also launch the measurement with the App.
5. INSERT OR REPLACE BATTERIES
When the LCD shows the battery “
”, replace all batteries with new ones.
1. Slide the battery cover in the direction of the arrow to open.
2. Insert 4 alkaline AA batteries in the correct polarity direction. Inserting them
incorrectly may damage the device and the warranty. Never use rechargeable
batteries. Use single use batteries.
3. Replace the battery cover.
- Disposal of discharged batteries to the authorized collecting party subject to the
regulation of each individual territory.
- If the unit will not be used for a long period, please take out all batteries to avoid
leakage damaging the unit.
6. HOW TO MAINTAIN AND STORE THE UNIT
- Use a dry soft cloth to clean the unit. If necessary, use a cloth lightly dampened with tap water.
- Do not use alcohol, benzene, thinner or other harsh chemicals to clean the device or cuff.
- Before using please wash your hands. Do not wash or wet the cuff.
- Avoid placing the unit where there is direct sunlight, high humidity or dust.
- Roll up the pressure armband and store in its case.
7. HOW TO PREVENT A MALFUNCTION
- Do not drop the device and avoid sudden jars or shocks.
- Do not insert other objects into any holes.
- Do not attempt to disassemble the unit.
- Do not put the unit in water.
- The monitor might not meet its performance specifications or may cause safety hazard if
stored or used outside the specified temperature and humidity ranges in specifications.
8. SPECIFICATIONS
Product name
BewellConnect® MyTensio
Model
BW-BT1
Classification
Class IIa
Measuring method
Oscillometric System
Indication
Digital LCD Display 50 x 66 mm (1,97 x 2,6 in) with Backlight: Green, Red,
Yellow
Dimensions
95 x 132 x 45 mm (3,74 x 5,2 x 1,77 in)
Weight
245g
(0,5 lb)
Measuring range
Cuff pressure: 0~299 mmHg.
Systolic: 60~260 mmHg
Diastolic: 40~199 mmHg
Pulse: 40~180 Beat/min.
Accuracy
Pressure: ±3 mmHg
Pulse: ±5% of reading
Inflation
Automatic inflating
Deflation
Automatic exhausting
Function
IHB icon
WHO function
Cuff
Upper arm cuff 22-42 cm (8,6-16,5 in)
Normal conditions
of use
Temperature: 10°C~40°C (50°F-104°F)
Humidity:15~90% RH, altitude more than 2000 m/6562 ft
Barometric Pressure: 70~106 kPa
Storage conditions
Temperature: -25°C~60°C (-13°F-140°F)
Humidity: 10~95% RH, altitude more than 2000 m/6562 ft
Barometric Pressure: 80~105 Kpa
Technology
MWI Technology (Measure While Inflating) - (Silent pump)
Bluetooth Technology Bluetooth 4.0
Battery
4 AA alkaline batteries
Device life
2 years
Automatic stop
2 minutes
Voltage
3.7V
Measure time
< 3min
Accessories included
1 microfiber pouch, 1 user manual, 4 AA Alkaline batteries, 1 armband
