VISIOMED ThermoFlash LX-26E EVOLUTION, Manual

22

23

Visiomed - LX-26E - UK - 092014

ture. For this, use the SURFACE TEMP mode.

Measurement range for SURFACE TEMP mode: 0°C – 60°C (32°F - 140°F). 

By selecting the ROOM Mode, it will display the ambient temperature of 

the room you are in.

Press the 

MODE 

button for one second, the screen will display: 

BODY

for the body measurement temperature. Press the

 MODE  

button again 

to switch to 

SURFACE TEMP

 or 

ROOM

 mode.

Press the

 MODE

 button again to switch to 

Surface Temp

 or

 Room 

mode.

Note: The 

ThermoFlash® LX-26 EVOLUTION

 is automatically set to BODY.

Important:  The surface temperature differs from the internal body 

temperature. To obtain the internal temperature, always use the 

BODY

mode. Please make sure to select the 

BODY 

mode for an internal tem-

perature reading and the 

SURFACE TEMP

 mode or the 

ROOM 

mode for 

an external area reading (bottle, bath, room…).

2. Choosing the temperature unit

Press the 

°C/°F

 button to select the temperature unit. The symbol 

of the chosen temperature unit is displayed (

°C 

for Celsius de-

grees and 

°F

 for Fahrenheit degrees). 

3. Data memory

To display the last temperature measurement, press the 

MEM

 button. 

You will obtain the last temperature measurement. To switch on 

the last measurement, press the 

°C/°F

 button.

The number indicated in interval of two measures corresponds 

to the number of measurements.  Press on the button

 MODE

 for 

review of the previous measurements.

To exit data memory, press the measure key. The 

Thermoflash®  

LX-26 EVOLUTION 

switches off after 5 seconds.

4. Alarm setup

The alarm threshold default value is 38°C (100.4°F). It cannot 

be changed. In case of higher temperatures than 38°C, a signal 

beeps while measuring the temperature.
5. Changing the batteries
Display: when the LCD screen displays

, the battery is used.

Operation: Open the lid and change the batteries, taking great 

care with the correct positioning. A mistake with this could cause 

damage to the apparatus and compromise the guarantee of your 

ThermoFlash® LX-26 EVOLUTION

. Never use rechargeable bat-

teries. Use only batteries for single usage.

VIII. TECHNICAL CHARACTERISTICS & PRECISION

1.  Normal conditions of use operating temperature: 10°C ~ 40°C 

(50°~ 104°F). Normal conditions of storage and transportation 

temperature: -20°C ~ 50°C (-68°~ 122°F). Humidity rate: ≤ 85%.

Visiomed - LX-26E - UK - 092014

2. Power: DC3 V (2 batteries LR6).

3. Size: 155 x 90 x 38 mm.

4. Weight: 220g.

5. Display Resolution: 0.1°C (0.1°F).

6.  Measuring range: 

In

 Body 

mode: 32°C ~ 42.9°C (90°F – 109°F). 

In

 Surface Temp

 mode: 0°C ~ 60°C (32°F to 140°F).

7. Precision: From 36°C to 39°C (96.8°F to 102.2°F) = +/-0.2°C/°F.

8. Consumption: ≤ 50mW.

9. Measuring distance: 5 cm – 8 cm (2 in – 3.14 in).

10. Automatic stop: 5 sec.
Longevity use

The 

ThermoFlash® 

is guaranteed for 40.000 readings.

IX. ADVICE

-  The protective glass over the lens is the most important and 

fragile part of the thermometer, please take great care of it.

- Clean the glass with cotton fabric, wet with  water or 70° alcohol. 

-  Do not use other batteries than mentioned batteries, do not re-

charge non rechargeable batteries, do not throw in fire.

-  Remove the batteries when thermometer is not used for an  

extended period of time.

- Do not expose the thermometer to sunlight or water.

- An impact will damage the product.

X. ACCESSORIES SUPPLIED

User Manual, Fast learning user manual, Guarantee card, Batteries 

supplied (LR6).

XI. TROUBLESHOOTING

If you have one of the following problems while using your

 Ther-

moFlash® LX-26 EVOLUTION

, please refer to this breakdown ser-

vice guide to help resolve the problem. If the problem persists, 

please contact our customer service at 

+33 892 350 334. 

-  The screen displays temperature superior to 95°: the tempe-

rature is in Fahrenheit. Change the measurement unit to Celsius.

-  The screen displays the body temperature inferior to 32°C 

(89.6°F): to measure a body temperature, the 

BODY

 mode must 

be selected. If you are on 

Surface Temp

 mode, the 32°C (89.6°F)

temperature displayed is showing the external temperature 

that your body releases.

-  The screen displays the message HI: when using the 

Ther-

moFlash® LX-26 EVOLUTION

, the message

 HI 

can show on the