Vision Engineering EVO Cam, User Manual

OPERATION

www.visioneng.com/support

8

Magnification

`

Press the Zoom-In button 

u

 to enlarge the subject 

within the image and Zoom-Out button 

v

 to reduce 

the subject size within the image. The unit will make 
a sound to indicate when it has reached maximum or 
minimum zoom limits.

Magnification  level  OSD  (On  Screen 

Display)

The current magnification level is displayed for example 
“x30“to show a magnification level of 30. When 
the magnification changes from optical to digital 

zoom a‘ d’ is also displayed, e.g. “x60d” to indicate a 

magnification level of 60 including digital zoom.

When changing lenses or monitor, the Lens Power 

and Screen Size settings need to be changed 
using the menu options (see 

page 9

)

to ensure 

the correct magnification is displayed.

Overview

Overview allows you to easily locate a point of interest 
on the object you are viewing. 

`

Press and release the Overview button 

w

 to make 

the camera zoom out fully. A cross is displayed in the 
centre of the screen as an aid to location.

`

Place the point of interest under the cross and press 

any key to restore the magnification to the previous 

level.

Brightness 

The image brightness can be adjusted to suit your 
preference.

`

Brightness adjustment is available by pressing and 
holding the Menu button 

x

 until you should hear 

a beep.

`

Next use the Zoom In and Zoom Out buttons (

u

 and 

v

) to adjust the image brightness as desired. 

`

Press the Menu button again to save the setting and 
exit Brightness mode.  The setting you choose will 
be saved and used subsequently for that mode of 
operation. 

M

u

v

w

x