7
2-2-5
Installing the Trinocular tube (optional)
Insert the video port (Fig. 8) into the trinocular unit (Fig. 6), and
then screw down bolt
⑨
to fix it into position.
2-2-6
Installing the Eyepiece
Insert the eyepieces (Fig.9) into the eyepiece tube until they are
flush with one another, ensuring the edges meet.
2-2-7
Installing the Lamp Housing
1.
Gently push the lamp holder (Fig.10) into the illumination kit
(Fig. 4) turn it to the correct position, and then screw down
bolt
⑧
to fix it into position.
2.
Insert the power plug
①
into the jack socket
②
, and screw
in the bolt.
Remember to remove the dust cap before you use
the transmitted light illuminator. Attach the lamp
holder (Fig.10) into the jack socket on the back of
the microscope (Fig.11) taking care when moving
this object into position, and then secure bolt
④
.
Insert the power plug
①
into the power jack of the
microscope
③
, and screw down the bolt to fix it into
position.
Fig.8
Fig.9
Fig.10
①
Fig.11
②
③
④
