22
GENERAL
TROUBLESHOOTING YOUR FITNESS BIKE
Our Bikes are designed to be reliable and easy to use. If, however, you
have a problem, these troubleshooting steps may indicate the cause.
PROBLEM: The Console does not light up.
SOLUTION: 1) Check to make sure the Bike is turned on (switch is
located near power supply).
PROBLEM: The Bike is making a
clicking noise.
SOLUTION: Using the supplied
15
MM
wrench, remove both the
right and left pedals, apply grease
to the threaded portion of the
pedals and reassemble the unit,
making sure the pedals are as tight
as possible.
PROBLEM: The Bike appears to work but there is no resistance change.
SOLUTION: The magnetic brake assembly is not working properly; please
contact your retailer.
PROBLEM: The Bike makes a squeaking or creaking noise.
SOLUTION: Check and tighten all the bolts on the Bike again.
NOTE: If the above steps do not remedy the problem, discontinue use,
turn the power off and contact your retailer.
Summary of Contents for Fitness Cycle E3100
