X6100/6200
Assembly
Page 4
NOTE: During each assembly step, ensure that ALL nuts and bolts are in
place and partially threaded in before completely tightening any ONE bolt.
NOTE: Always read the Owner’s Manual before operating your
Vision Fitness Elliptical Trainer.
Step 1 • Rear Wheel & Guide Rail Assembly -
All Models
1: Slide the Rear Foot Axle (96) through the Rear Foot Nylon Sleeves (98).
2: Place a Wavy Washer (95) over each end of the Rear Foot Axle (96).
3: Slide the Pedal Arm Guide Rails (7) onto the Rear Foot Wheel Axle (96).
4: Place the Inside Wheel Washers (166) on the Rear Foot Wheel Axle (96).
5: Slip the Rear Transport Wheels (97) onto the Rear Foot Wheel Axle (96)
and secure them with the Outside Wheel Washers (167) and the Wheel
Attachment Bolts (165) using the 5mm Allen wrenches.
