4
1
STEP
• Slide the rubber cover onto the
console mast.
• Unfold the console cable and
attach it to the string located inside the
console mast. Guide the wire up
through the mast while simultaneously
sliding the console mast onto the
frame bracket.
• Bolt the mast to the frame using the
two bolts and two nuts; make sure
these are tight!
• Slide the rubber cover down over
the bolt heads.
ORANGE BAG
1
STEP
2
STEP
• Install the rubber boot over the top
of the lower right handlebar and slide
to the bottom corner.
RUBBER BOOT
2
STEP
3
STEP
• Mount the lower right handlebar to
the frame tube using one of the bolts
in the bag.
BLUE BAG
3
STEP
