Phantom Miro M & LC Series Camera Manual
44
Using the following ‘Video Control’ buttons locate
the first image of the Cine to be saved and click the
‘Mark-In’
button.
Locate the last image of the Cine to be saved and
click the ‘Mark-Out’
button.
Click ‘Play, Speed, & Options” and enable (check)
‘Limit to Range’.
Under the ‘Video Control’ buttons click the ‘Jump
to Start’
button, then review the edited Cine.
Click the ‘Save Cine...’ button to save the edited
Cine to the computer’s hard drive.
If you wish to save the clip to an attached Phantom
CineFlash, click the down-arrow to the right of the
‘Save Cine...’ button and select ‘Save RAM Cine to
Flash’.
Editing a Cine
Vision Resaerch recommends reviewing
the save cine file before erasing it from
the camera’s internal memory (RAM).
Saving a Cine
The PCC software provides you with the ability to
convert Cine files into a number of other formats.
Single Cine files can be converted by selecting the
desired format from the ‘Save as Type’ selection
list in the ‘Save Cine’ dialogue window.
The file formats above the separator line in the
‘Save as Type’ selection list is ‘movie-like’ formats
(meaning the entire clip will be saved as a single
file) while the formats below the line are image
formats (meaning each frame of Cine will be saved
as a sequence of images.)
Converting Cine Files
Re-saving a clip in the ‘Cine RAW’ format
can be useful for creating sub-clips with
no loss in image quality or metadata.
