Step 1
Turn on the power of the unit. The LCD screen shows the local view, the
image of the caller.
Step 2
Pick up the handset. Enter the desired IP address/number * (See note). Use
the " " key to input the dots between the numbers. When a key is
pressed, the image on the LCD screen disappears and the numbers you
input are displayed.
Step 3
The other party answers the phone, and the video connection is established.
You will be able to see the person you are talking to.
Step 4
To end the connection, simply hang up the handset.
Step 5
If there is difficulty in making connection, please make sure that VT640P
has been properly installed. Please also check if the network settings are
correctly configured.
Power Saving Mode
The
VT640P
incorporates a power saving circuit to protect its internal components and
extend its service life.
If the VT640P is inactive for 5 minutes, the LCD screen automatically shuts down and
goes blank. The power indicator blinks.
The image returns to the screen when the handset is picked up or any key is pressed.
*Note: To dial numbers, VT640P must work in conjunction with additional
accessories, such as the H.323 Gatekeeper.
＊
Making a video call
Connection
ADSL
Type
Timing ADSL
IP
When the ADSL is used exclusively by VT640P
VT640P System Setup
IP Address: see note
Phone No. :
Subnet Mask: see note
Gateway: see note
(see p. 37)
(see p. 38)
Note :
IP, Subnet Mask and Gateway are assigned by PPPoE.
Internet
ATU-R
VT640P
Single, Public, & Dynamic
Phonebook
Configuration
Password
Phonebook
Configuration
Password
Phonebook
Configuration
Password
Bandwidth Setup
Remote Update
System Setup
Bandwidth Setup
Remote Update
System Setup
Bandwidth Setup
Remote Update
System Setup
Server Setup
Network Setup
Terminal Setup
Option
Server Setup
Network Setup
Terminal Setup
Option
Server Setup
Network Setup
Terminal Setup
Option
(see p. 38)
: as default
: as default
: as default
GateKeeper:
DHCP: OFF
PPPoE: ON
NAT: OFF
Auto Answer:
Ringer:
H.263:
Keep Alive:
PPPoE Password: see note
PPPoE Username: see note
Note :
PPPoE Username and Password are assigned by your ISP.
Alias:
Host Name:
Auto Answer Rings (0~9):
NAT Door:
GK Password ( )
System Setup (Cont'd)
34
|
19
|
User Manual
IP Broadband Videophone
