■
LENS ADJUSTMENTS
■
CAMERA SETTINGS
●
OSD SWITCH FUNCTION
CONNECTIONS AND CAMERA SETTINGS
1. Adjust the pan(360
˚
) and tilt(90
˚
) position.
2. Setting the zoom position by using Zoom Lever Screw.
3. Setting the focus by using Focus Lever Screw.
SETUP FUNTION
SUMMARY
when using BUILT-IN lens, selecting
MANUAL will allow the aperture to be fixed
MANUAL: 1/60(50) ~
1/120,000sec, x2~ x128
WHITE BAL.
ATW
, MANUAL, AWC
ATW: 1,800 ~10,500
˚
K
BACKLIGHT
OFF
, LOW, MIDDLE, HIGH
Backlight compensation
AGC
NORMAL
, HIGH,OFF
the Brightness can be adjusted(1 ~ 70)
MIDDLE
, HIGH, OFF, LOW
when AGC is turned off,
DNR does not operate.
when AGC is turned off,
SENS-UP does not operate
LENS
DC(=25)
, MANUAL
SHUTTER
ESC, MANUAL, FLK,
OFF
SENS-UP
AUTO(=X6)
, OFF
OSD
DNR
CONNECTIONS AND CAMERA SETTINGS
1. Adjust the pan(360
˚
) and tilt(90
˚
) position.
2. Setting the zoom position by using Zoom Lever Screw.
3. Setting the focus by using Focus Lever Screw.
SETUP FUNTION
SUMMARY
when using BUILT-IN lens, selecting
MANUAL will allow the aperture to be fixed
MANUAL: 1/60(50) ~
1/120,000sec, x2~ x128
WHITE BAL.
ATW
, MANUAL, AWC
ATW: 1,800 ~10,500
˚
K
BACKLIGHT
OFF
, LOW, MIDDLE, HIGH
Backlight compensation
AGC
NORMAL
, HIGH,OFF
the Brightness can be adjusted(1 ~ 70)
MIDDLE
, HIGH, OFF, LOW
when AGC is turned off,
DNR does not operate.
when AGC is turned off,
SENS-UP does not operate.
SPECIAL
Refer to the section below
EXIT
Save the settings then exit
SPECIAL FUNTION
SUMMARY
uppercase or lowercase,
OFF
maximum length for the name
/numeral 0~9/-, null
display is limited 15letters.
AUTO :
daytime
→
colour mode ,
night-time
→
B/W mode
B/W : Always in B/W mode
COLOUR: Always colour mode
EXTERN
:
CDS
EXTERNAL SIGNAL
INPUT
LL mode: you can adjust
desired phase from 0
˚
~ 359
˚
,
auto detection
MOTION
ON mode: AREA(4 programmable
DETECTION
zone /SIZE), the word
MOTION DETECTED" appears on the
screen when movement is detected
ON mode:AREA(4x programmable
zones) /SIZE/TONE
MIRROR
OFF
, ON
set a horizontal image inversion.
the available range
of level is 0 ~ 31.
Reset all settings to factory
defaults
save the SPECIAL MENU and then
return to the SETUP MENU
RESET
RETURN
LENS
DC(=25)
, MANUAL
SHUTTER
ESC, MANUAL, FLK,
OFF
SENS-UP
AUTO(=X6)
, OFF
CAMERA ID
OFF
, ON
PRIVACY
OFF
, ON
SHARPNESS OFF,
ON(=8)
OSD
DNR
DAY NIGHT
AUTO
, B/W, EXTERN, COLOR
SYNC
INT
, LL (n/a for 12VDC model)
CONNECTIONS AND CAMERA SETTINGS
1. Adjust the pan(360
˚
) and tilt(90
˚
) position.
2. Setting the zoom position by using Zoom Lever Screw.
3. Setting the focus by using Focus Lever Screw.
SETUP FUNTION
SUMMARY
when using BUILT-IN lens, selecting
MANUAL will allow the aperture to be fixed
MANUAL: 1/60(50) ~
1/120,000sec, x2~ x128
WHITE BAL.
ATW
, MANUAL, AWC
ATW: 1,800 ~10,500
˚
K
BACKLIGHT
OFF
, LOW, MIDDLE, HIGH
Backlight compensation
AGC
NORMAL
, HIGH,OFF
the Brightness can be adjusted(1 ~ 70)
MIDDLE
, HIGH, OFF, LOW
when AGC is turned off,
DNR does not operate.
when AGC is turned off,
SENS-UP does not operate.
SPECIAL
Refer to the section below
EXIT
Save the settings then exit
SPECIAL FUNTION
SUMMARY
uppercase or lowercase,
OFF
maximum length for the name
/numeral 0~9/-, null
display is limited 15letters.
AUTO :
daytime
→
colour mode ,
night-time
→
B/W mode
B/W : Always in B/W mode
COLOUR: Always colour mode
EXTERN
:
CDS
EXTERNAL SIGNAL
INPUT
LL mode: you can adjust
desired phase from 0
˚
~ 359
˚
,
auto detection
MOTION
ON mode: AREA(4 programmable
DETECTION
zone /SIZE), the word
MOTION DETECTED" appears on the
screen when movement is detected
ON mode:AREA(4x programmable
zones) /SIZE/TONE
MIRROR
OFF
, ON
set a horizontal image inversion.
the available range
of level is 0 ~ 31.
Reset all settings to factory
defaults
save the SPECIAL MENU and then
return to the SETUP MENU
RESET
RETURN
LENS
DC(=25)
, MANUAL
SHUTTER
ESC, MANUAL, FLK,
OFF
SENS-UP
AUTO(=X6)
, OFF
CAMERA ID
OFF
, ON
PRIVACY
OFF
, ON
SHARPNESS OFF,
ON(=8)
OSD
DNR
DAY NIGHT
AUTO
, B/W, EXTERN, COLOR
SYNC
INT
, LL (n/a for 12VDC model)
