15
Troubleshooting
Make sure the power supply cord is securely connected to the
electrical outlet. Make sure the opposite end of the power supply
cord is securely connected to the Freedom Machine. Next, press the
square shaped red power button on the Freedom Machine control
box. The
1.
Why is the power not working?
The most common reason for a blurry or out-of focus image is
caused by dust or debris on the camera’s protective lens. Clean the
protective lens with a non-abrasive lens cleaning towel.
2.
Why is the image out of focus?
Make sure the Freedom Machine power button is pressed inward
and that the power supply is connected. Try turning on and off the
Freedom Machine twice.
3.
Why is my reading table dim?
Position the braking levers so they are close together. Next, move the
reading table in a small circular motion. If you can’t move the table
at all check to see if there is a small object obstructing the reading
table’s movement. If you are able to move the table, gradually make
the circular motion larger. To lubricate the reading tables ball
bearings, use a non-corrosive lubrication.
4.
Why is my reading table not moving smoothly?
Turn the brightness button to maximum brightness.
5.
Why is my image appearing dim on screen?
Summary of Contents for Freedom Machine
