Affixing Hooks and Shelf Brackets
Hooks, shelving and other storage devices can be installed on the walls of your Vision Vinyl
Shed just as simply as in your garage.
Screws or other threaded fasteners to affix hooks, hangers and shelving, should be inserted
ONLY in the scored (indented) groove
located 3/8" to the side of the seam created by the
joint of two wall panels (See Figures 20A and 20B).
DO NOT INSERT SCREWS DIRECTLY IN THE JOINT BETWEEN TWO WALL PANELS.
It is recommended that fasteners be
self tapping screws no longer than 1-inch long
and at least
#10 in size
. (Screws provided with certain hanging devices may be longer or
inappropriate for this application). Screws may be inserted using a power screw driver, driver
drill or manual screw driver. Bring screws to a snug fit but do not overtighten.
DO NOT
ATTEMPT TO COUNTERSINK SCREWS. DO NOT USE STAR-TYPE OR TOGGLE
(MOLLY) BOLTS
Follow hanging instructions that accompany the hooks or brackets relative to spacing
of supports and the number of fasteners to be used. Weight limits identified for the hooks,
brackets or shelf standards should be strictly observed.
20A
20B
Joint
19
15
