30
GENERAL
TROUBLESHOOTING
Our Suspension Elliptical Trainers are designed to be reliable and easy
to use. If, however, you have a problem, these troubleshooting steps may
reveal the cause.
PROBLEM:
The console does not light up.
SOLUTION:
Check to make sure the power switch located on the
backside of the console is turned on.
SOLUTION:
Make sure the power cord is plugged into the base of the
Suspension Elliptical Trainer, and the power switch located near the plug
is on.
SOLUTION:
Make sure the wire harness is plugged into the back of the
console.
PROBLEM:
You feel a thump or hitch in the stride motion.
SOLUTION:
Check assembly and tightness of all hardware.
SOLUTION:
Check the bolts and the bracket under the footplate.
NOTE:
If the above steps fail to remedy the problem, discontinue use, turn
the power off and contact your retailer.
