8
SB-800P_manual_en
INPUT TYPE SELECTOR
LINE LEVEL
SB-800P has an amplifier built in. It can accept stereo line-level signal which comes out of the
headphone jack on a laptop or phone.
To adjust volume turn the dial on the bottom (note this product does not have a remote
control).
SPEAKER LEVEL
If flat-panel display has an amplifier built in, select SP IN to receive the more powerful speaker-
level signal. This will bypass the amplifier in the SP-800P. Generally this will use unshielded
speaker cable which is often black and red.
To adjust volume use display remote control. There is no need to run power to soundbar.
NOTE: Do not connect SPEAKER-LEVEL signal to the LINE-LEVEL inputs.
SPECIFICATIONS
PRODUCT DIMENSIONS: 756 x 75 x 99mm / 29.8″ x 2.9″ x 3.9″ (width x depth x height)
PACKAGED DIMENSIONS: 870 x 92 x 135 mm / 34″ x 3.6 ″ x 5.3″
PRODUCT WEIGHT: 2 kg / 4.4 lb
PACKAGED WEIGHT: 2.7 kg /5.9 lb
CONSTRUCTION MATERIAL: ABS Plastic
COLOUR: White
TECHNICAL DETAILS:
Amplifier Output: 2 x 15w watts (RMS)
Woofer: 2 x 3.5″
Tweeter: 2 x 0.5″
Input 1: Minijack (3.5mm)
Input 2: 2-Phono (RCA) (inputs are summed)
Speaker Input (from flat panel if it has internal amplifier): Removable Phoenix type
Output Impedance: 8 ohms
Sensitivity: 88dB (1w/1m)
Frequency response: 120Hz-20kHz
