SV- 511 System Features
Monitor
Uses 10-26 VDC free voltage
•
Two models are available
•
(Camera, and audio video input jacks)
Audio/Video output jacks for recording
•
Speaker
•
Two camera input ports
•
Camera
Powered by 12 VDC from monitor
•
Turns on when monitor is on or ignition circuit is powered up
•
Charge coupled device image sensor with high resolution picture
•
Backlight compensation
•
Wide fi eld of view: Dia: 120
•
⁰
Water resistant housing
•
Operating temperature range: -250C to +500C (-130 F to +1220 F)*
•
*These are typical ranges, camera will operate outside these parameters.
4
9
Flowchart B: When monitor screen is black
YES
YES
YES
YES
NO
NO
NO
Monitor screen
is black.
NO
Turn on
power switch
and/or ignition.
Check power
and ground
connections.
Make proper
adjustments.
Replace
fuse.
Replace
monitor.
Is green LED on
monitor illuminated?
Is monitor power switch
and ignition turned on?
Adjusted
properly?
Check contrast and
brightness knobs for
proper adjustment.
Are both fuses in
good condition?
Check in-line 3-AMP fuse in monitor
power harness (inside overhead shelf ) and
30-AMP ignition mini-fuse at fuse block.
If monitor screen is black:
Make sure power is on and
•
ignition is on
Confi rm that green LED on
•
monitor is illuminated
Check contrast and
•
brightness knobs for proper
adjustment
Check power and ground
•
connections
Check in-line fuse in
•
monitor’s power harness
