6
TC2-HDBT_manual_en
INSTALLATION
When used as a set connect power to either the transmitter or receiver but
not both.
Vision HDBT products use proprietary PoE. When using either the
transmitter or receiver in conjunction with other manufacturer’s HDBT
equipment it is necessary to connect power.
1.
CONNECT CABLES
You can use unshielded twisted pair (UTP) cable or shielded twisted pair (STP). For best
results use STP CAT5e/6 cable.
2.
POWER ON HDBT TRANSMITTER AND RECEIVER
3.
POWER ON DISPLAY DEVICE
4.
POWER ON SOURCE DEVICE
EDID (EXTENDED DISPLAY IDENTIFICATION DATA)
This enables the source device to ‘ask’ the display device what resolution it is, and output that
resolution.
Position
Functions
000 (default) Use EDID from display device, analogue audio output enabled
001
Use EDID from display device, audio output disabled
010
Fixed EDID, 3D, digital audio output enabled
011
Fixed EDID, Non-3D, digital audio output enabled
