14
VISION RF PAGING SYSTEM USER’S GUIDE
2-STAGE SENSOR TRIGGER
1st Stage (“Warning Chirps”).
When the shock sensor detects
a light impact, the siren will chirp 5 times, the pager will beep
and update icons as shown in Fig-6 below. Any optional sensors
can you have installed can also trigger the 5 warning chirps. No chirps will
be produced in Sensor Bypass Mode or Silent Mode.
2nd Stage (“Full Trigger”).
When the shock sensor detects
strong impact to the vehicle body, the siren will blast for 30 sec.
(or until stopped by a button press), and the pager will emit a si-
ren tone and update icons as shown in Fig-6 below. Any optional
sensors you have installed can also trigger the full siren blast sequence.
The siren will not be triggered while in Sensor Bypass Mode or Silent Mode.
DOOR TRIGGER
The siren will blast for 30s (unless in Silent Mode) whenever a door is opened
while the system is Armed. Vehicle hazard lights will flash (if supported), and
your pager will emit a siren tone and update icons as shown in Fig-7 below.
AL ARM TRIGGERS
FIG-6: Pager LCD Icon Change Upon Shock Detection
SHOCK
ICON
FLASHES
FIG-7: Pager LCD Icon Change Upon Door Trigger
DOOR
ICON
FLASHES
Summary of Contents for TR537S
Page 27: ...NOTES...
