background image

1

© 2011-2016 KIRAMEK, INC.

The VISION 2-way RF Paging System is backed by a limited one year 

warranty against defective components and/or improper product assem-

bly to the original purchaser for as long the vehicle is owned by that 

same purchaser, contingent upon installation by an Authorized VISION 

Dealer.  This warranty becomes void if the Paging System was not sold 

and installed by an Authorized VISION Dealer or the system is moved 

to another vehicle.   

During the warranty period, Kiramek Inc. will repair or replace, at its 

sole discretion, any system component that is found defective in mate-

rial or assembly during the warranty period, provided that the product 

is returned to Kiramek Inc. by an Authorized VISION Dealer and is ac-

companied by a clear and legible copy of the original purchaser’s receipt. 

Any damage to your VISION Paging System that results from normal 

wear-and-tear, accidents, drops, strong impact, water damage, leaked 

battery damage, improper use, neglect, faulty wiring, incorrect installa-

tion, modification, removal or defacement of the product serial number, 

alteration or repair outside Kiramek Inc or its Authorized VISION Deal-

ers immediately voids this warranty.

This warranty is limited to defective parts only and does not provide 

any compensation whatsoever for damages associated with the VISION 

Paging System.  This warranty does not cover installation labor, prod-

uct removal and/or reinstallation fees.  This warranty does not cover the 

elimination of externally generated RF noise, or weak reception.  This 

warranty also does not cover the lifespan of the included AAA battery, 

nor any damage to the pager that may occur if that or any other battery 

leaks inside the pager and causes corrosion to the contacts or causes 

other related malfunction or damage. 

This warranty is valid for the original purchaser only and may not be 

transferred to another party. Kiramek Inc makes no warranty against 

theft or vandalism of the vehicle in which the VISION Paging System 

was installed. This warranty shall not be interpreted as an insurance 

policy against loss, nor shall Kiramek Inc be liable any in way for such 

loss, financial or otherwise.

LIMITED ONE YEAR Warranty

KIRAMEK may opt to validate the above Warranty, in writing, for shipments outside Ja-

pan, in cases where there is no local VISION Dealer available to perform the install.

Summary of Contents for TR537S





























Reviews: