VE810 Series 4 User Manual
8
© 2015 Vision Engraving Systems
1.2
Safety Precautions
Keep hands clear of the bottom of the spindle during operation.
Always stop the machine before making any adjustments.
Do not operate the machine with the covers removed.
Wear safety glasses when cutting any materials that emit chips.
Use extreme caution when inserting or removing cutters.
Before any servicing, disconnect the power cord.
To avoid electric shock or equipment damage, ensure that the machine is connected to the
appropriate electrical source as noted in the installation procedures.
Never operate the equipment with damaged or frayed power cords, loose connections, or exposed
extension cords where the cord could create a tripping hazard.
Be sure to hold the plug, not the cord, when disconnecting the machine from an electrical socket or
power source.
Place the machine in a location with low humidity and a minimum of dust. Avoid placing the equipment
in direct sunlight or in locations with excessive heat. Follow the maintenance instructions for proper
cleaning of the controller air filter.
If your machine does not operate properly; in particular, if there are any unusual sounds or smells
coming from it, immediately unplug it and contact a service technician or your local distributor.
Unplug the machine when it is going to be left unused for an extended period of time.
