background image

 

23 

Terms and conditions of sale

 

This product is guaranteed from manufacturing faults for 24 months from 
the date of purchase.  If you have any issues with the product and you did 
not  purchase  directly  from  VisionAid  International  then  please  contact 
your retailer in the first instance.  

For all returns and repairs contact your authorised distributor.  

 

This  product  is  CE  marked  and  fully  complies  with  all  applicable  EU 
legislation.  

The  WEEE  logo  on  the  product  or  its  box  indicates  that  this 

product  must  not  be  disposed  of  or  dumped  with  your  other  household 
waste.  You  are  liable  to  dispose of  all  your  electronic  or  electrical  waste 
equipment by relocating over to the specified collection point for recycling 
of such hazardous waste. Isolated collection and proper recovery of your 
electronic and electrical waste equipment at the time of disposal will help 
conserve  natural  resources.  Moreover,  proper  recycling  of  the  electronic 
and  electrical  waste  equipment  will  ensure  the  safety  of  human  health 
and the environment. For more information about electronic and electrical 
waste equipment disposal, recovery, and collection points, please contact 
your  local  authority,  household  waste  disposal  service,  shop  from  where 
you purchased the equipment, or manufacturer of the equipment. 

© VisionAid International 2017 

 

 

 

Summary of Contents for Helix HD


























Reviews: