8
2) Place one hand on the base and use your other to lift the front
narrow section of the camera arm. Raise the camera arm from its
transport position to the
second
(high) click position (approximately
30 degrees).
3) Grasp the top of the camera head (underneath the camera arm) and
carefully rotate it downwards, towards you and up (approximately
160 degrees) until it is parallel to the base of the unit. This is its
first
click position (high), used for lower levels of magnification. For more
information please see Adjusting camera head height on page 12.
4) Remove the control pad from its stowed position.
