10
HDMI Switcher connection (if required)
The Helix HD has an integrated HDMI switcher that can be used to
connect an additional video device such as a digital TV box or DVD
player. This function simplifies switching between the Helix HD and the
additional device. It is also useful if you have no available HDMI
connections on your chosen display.
1) Insert the HDMI cable from your existing device e.g. digital TV box
or DVD player, into the IN connection.
2) To show the connected device on your display either switch off the
Helix HD, or press the external Input Select button located on the
top left of the Helix HD Control pad explained (see on page 13). The
Helix HD must be connected to the mains and the mains power
switched on for the HDMI switcher to function.
Power connection
1) Insert the round connector from the power adapter into the round
PWR connection on the right-hand side of the rear panel.
2) Insert the mains plug into a wall socket and ensure it is switched on.
