© 2019
Order #XXXXX
*
*
Completed Stand Assembly
Counter Top
*
Monitor Mount
Attachment
Slide connectors into
grooves of verticals.
Tighten set screws.
Attach monitor mount
to connectors, using bolts.
Connectors
Monitor
Mount
*
Align hole with pin
Rotate pin. Spring
will push pin into hole.
Counter Top Attachment
1
2
*
Pin
Hole
Connector
Literature Holder Attachment
Locks
Literature
Holder
Attach angled end of connector to
literature holder. Attach flat end of
connector to vertical extrusion.
Tighten locks to secure.
*
*
*
*
*
Door
Hinge
Hinge
Pin
Slide pin into
hinge attached
to vertical.
Slide door
hinge over pin.
Door Connection
*
V15
Connector
Extrusion Connector
Slide upper extrusion
over connector and
rest on lower extrusion.
Secure with set screws.
*
To prevent product loss,
keep all screws attached
to connector after
disassembling.
Set Screw
Infill
Infill
Infill
Infill
Door
Shelf
Item
1
2
3
4
5
6
7
Description
37.5” Q914 Vertical Extrusion w/ Hinges
37.5” Q914 Vertical Extrusion w/ Door Stop
32.5” Q914 Vertical Extrusion
37.5” Q914 Vertical Extrusion
13.5” Z45 Horizontal Extrusion
14.5” Z45 Horizontal Extrusion
14.5” Z45 Horizontal Extrusion
Qty.
1
1
2
2
5
2
2
4
4
3
3
1
2
5
7
6
6
7
5
5
5
5
*
*
Steps:
1) Attach verticals [1 to 3] and [2 to 3]. See
Extrusion Connector
detail.
2) Attach front assembly [4] [5] and infill to back assembly [1/3] [2/3] and [5] with [6] [7] and infills.
3) Connect door to vertical [2]. See
Door Connection
detail.
4) Connect shelf supports to Velcro on inside of assembled stand, then set shelf on top of supports.
5) Lock counter top to horizontals [7]. See
Counter Top Attachment
detail.
6) Attach
monitor mount t
o verticals [3]
. See
Monitor Mount Attachment
detail.
7) Attach literature holders to verticals [1] and [2]. See
Literature Holder Attachment
detail.
When Packing:
Keep extrusions [
1
] [
2
] and [
5
] with door assembled.
Keep extrusions [
4
] and [
5
] with infill assembled.
Keep V15 connectors attached to extrusions [
1
] and [
2
].
MOD-1234 Monitor Stand
If you would like to tell us about your experience with your setup instructions please email us at
info@classicexhibits.com
SETUP INSTRUCTIONS
